[Help]
Task3DImageHelp=Adds an extra dimension to the image.
Task3DImageWidthHelp=Defines the width of the limiting frame, not including the mirror image. The resulting image will fit the width (without stretching).
Task3DImageHeightHelp=Defines the height of the limiting frame, not including the mirror image. The resulting image will fit (without stretching) the height.
Task3DImageTopMarginHelp=Defines the size of the extra space above the image.
Task3DImageBottomMarginHelp=Defines the size of the extra space below the image.
Task3DImageLeftMarginHelp=Defines the extra space at the left of the image.
Task3DImageRightMarginHelp=Defines the extra space at the right of the image.
Task3DImageAngleHelp=Defines the angle for rotating the image in the 3D space, relative to the vertical axis.
Task3DImageDepthHelp=Defines the depth of field.
Task3DImageUpDownPosHelp=Defines the vertical position of the image.
Task3DImageShowReflectionHelp=If this option is checked, a translucent image will be created.
Task3DImageReflectionStartHelp=Defines the opacity level for the upper reflection boundary. This option is visible if the Show reflection option is checked.
Task3DImageReflectionEndHelp=Defines the opacity level for the lower reflection boundary.
Task3DImageBackgroundHelp=Defines the color of the background for the the resulting image. You can also use a transparent color.
TaskAutoEnhance1Help=Helps to perform an automatic image adjustment. It performs complex
operations on the image to simulate how humans see the world to make
the image to have better contrast and colors.
TaskAutoEn1SubSampleSizeHelp=To make it fast, operations are performed on a subsampled image.
This parameter specifies the image width.
TaskAutoEn1SlopeHelp=Defines the core function slope and it is measured in degrees. This value
contribute to change contrast. Allowed values 0..90°
TaskAutoEn1CutHelp=Defines the function range. This value contribute to change contrast.
Allowed values are 0..100
TaskAutoEn1NeighbourHelp=When the subsampled image is used to change the full size image, Window Size option
specifies the window size of the conversion. High values slow down process, but
produce better results. Default is 2.
TaskAutoEnhance2Help=Performs complex operations on the image to simulate how humans see the world
to make the image to have better contrast and colors.
TaskAutoEn2ScaleCountHelp=The algorithm is applied to different scales of the image. This parameter
specifies the number of scales. Default 3.
TaskAutoEn2ScaleCurveHelp=Specifies how build the size of each scale. Allowed values 0..2. Default 2.
TaskAutoEn2ScaleHighHelp=Allowed values from 16 to 250. Default 200.
TaskAutoEn2VarianceHelp=Defines the output variance. Default 1.8.
TaskAutoEn2LuminanceHelp=If this option was checked, the algorithm is applied only to luminance (luminosity)
channel, so the algorithm doesn't touch colors.
TaskAutoEnhance3Help=Enhances luminosity applying a local adaptation tone mapping algorithm.
TaskAutoEn3GammaHelp=Adjusts resulting luminosity. Allowed values >0
TaskAutoEn3SaturHelp=Adjusts color saturation. Allowed values from -100 to 100.
TaskSaveAsHelp="Saves (converts) images. If there are no active tasks that modify images
(Save As, Rename, Publish on Facebook, or Add to PDF)
before the current task, or there is a Reset To Original task, and
the File Type option is set to <Original File Type>, the file will be
copied and/or renamed as per the File Name and Folder options."
TaskSaveAsFileNameHelp="A new image name (WITHOUT AN EXTENSION! The extension should be defined
via the File Type option). You can use tags.
Here’re more details about some tags. In the File Attributes group:
The <Current Index> tag, which has the format <####>, will
contain the current number of the image being processed. To change the
sequential number of an image, move it up or down. To define a specific
number of digits in the index, put the same number of the # characters in
the tag; any empty places will be filled with leading zeros.
The <Original Name> tag defines the file name AND the extension."
TaskSaveAsFileTypeHelp=Defines the image type for conversion.
TaskSaveAsFolderHelp="Defines the folder for saving the image. You can specify either an absolute path by
clicking the folder button, or a relative path by using the following tags:
- The <Source Folder> tag defines an ABSOLUTE path to the image folder
(so do not put any characters before this tag).
- The <Year (4 digits)> tag defines the 4 digits of the
image-creation year.
- The <Year (2 digits)> tag defines the 2 last digits of the
image-creation year.
- The <Month (Full name)> tag defines the full name of the image-creation
month in the current locale (January, February, March, etc.).
- The <Month (Short name)> tag defines the short name of the
image-creation month in the current locale (Jan, Feb, Mar, etc.).
- The <Month (with leading zero)> tag defines the number of the
image-creation month, with a leading zero for one-digit values (01, 02, 03, etc.).
- The <Month (without leading zero)> tag defines the number of the
image-creation month, without a preceding zero (1, 2, 3, etc.).
- The <Day (full name)> tag defines the full name of the image-creation
weekday in the current locale (Monday, Tuesday, Wednesday, etc.).
- The <Day (short name)> tag defines the short name of the
image-creation weekday in the current locale (Mon, Tue, Wed, etc.).
- The <Day (with leading zero)> tag defines the number of the
image-creation day of the month, with a preceding zero for one-digit values
(01, 02, 03, etc.).
- The <Day (without leading zero)> tag defines the number of the
image-creation day of the month, without a preceding zero (1, 2, 3, etc.)."
TaskSaveAsFileExistsHelp="Defines an action if a file with the specified path already exists. If the
Auto Rename option is set, the application will automatically try to
modify the file name by affixing a number as follows: File_name(#).extension,
where # indicates the location of the number."
TaskSaveAsDefOptionsHelp="Lets you configure image saving for some image types. If you uncheck
this option, then, depending on the selected image type (the File Type
option), other options of the task will be visible to let you configure image
saving for the selected image type. If you set <Original File Type> for
the File Type option, all image saving options for all image types will
be visible."
TaskSaveAsBMPCompressionHelp="This option is visible only if the Use Default Options option is unchecked,
and the File Type option is set to <Original File Type> or BMP. Defines
the compression method. The RLE compression can be used only for saving
16-color or 256-color BMP images. Sometimes compression may increase the file size."
TaskSaveAsBMPVersionHelp=Defines the BMP version of the image.
TaskSaveAsJPEGColorSpaceHelp=Defines the color space for saving the image. RGB - separate red, green, and
blue channels. Gray levels - one gray channel. YCbCr - a three-channel
color space that encodes the luma component, and also the blue-difference and
red-difference chroma components.CMYK - a four-channel color space often used
for printing. YCbCr and black - a four-channel color space.
TaskSaveAsJPEGDCTMethodHelp=Defines the discrete cosine transform (DCT) method for saving the image.
ISLOW - a slow but accurate integer algorithm. IFAST - a fast but less
accurate integer algorithm. FLOAT - a method that uses floating-point numbers.
TaskSaveAsJPEGCromaSubsamplingHelp=Defines chroma subsampling, which governs the quality of the resulting JPEG image.
This option is visible if the JPEG: Color Space option is set to YCbCr.
Medium - 4:2:2 subsampling format, medium quality. High - 4:1:1 subsampling
format, the poorest quality (used by default for JPEG). None - 4:4:4 subsampling
format, the best quality.
TaskSaveAsJPEGOptimalHuffmanHelp=If this option is checked, the encoder will generate a Huffman Table
optimized for the actual frequency distribution in the image.
TaskSaveAsJPEGQualityHelp="Defines the quality of the resulting image in the range from 1 to 100. High
values produce better image quality, but the resulting file size will be larger;
vice versa, low values produce poorer image quality, but the resulting file
size will be smaller."
TaskSaveAsPNGCompressionHelp=Defines the lossless image compression rate from 0 (no compression) to 9 (the best
compression), with higher values resulting in longer operation of the encoder.
TaskSaveAsPNGFilterHelp=Defines a filter to be applied before encoding the image. This option may have a
significant impact on image encoding speed and the resulting file size, and a
slightly lower impact on image decoding speed.
NONE - no filter.
SUB - predicts the next byte based on the current byte.
PAETH - a filter based on the algorithm by Alan W. Paeth.
TaskSaveAsPNGInterlacedHelp=Defines lossless, interlaced encoding. The user will see as the image gradually
loads while it is being decoded.
TaskSaveAsJ2000ColorSpaceHelp=Defines the color space for saving the image. You can set GRAYLEV values
(one-channel color space: shades of gray) or RGB values (three-channel color space:
red, green, and blue).
TaskSaveAsJ2000RateHelp=Defines the compression rate for the image. You can enter a real number
from 0.0 to 1.0, where 1.0 means no compression (lossless mode).
TaskSaveAsPCXCompressionHelp=Defines the compression method. The values are similar to those of the BMP: Compression option.
The Uncompressed mode is incompatible with most PCX decoders.
TaskSaveAsHDPLosslessHelp=If checked, this option enables lossless compression.
TaskSaveAsHDPImageQualityHelp=This option is available only if the HDP: Lossless option is unchecked.
It defines the image quality as a real number from 0.0 to 1.0, where 0.0 refers
to the poorest quality (the highest compression), and 1.0 refers to the best quality
(lossless compression).
TaskSaveAsTGACompressedHelp=Defines whether to use compression when saving the image. RLE compression is used.
TaskSaveAsWEBPLosslessHelp=If enabled, then ImBatch will encode the image without any loss.
TaskSaveAsWEBPQualityHelp=Specifies the compression factor for image between 0 and 100.
In case of lossy compression, a small factor produces a smaller file with lower quality.
Best quality is achieved by using a value of 100.
In case of lossless compression, a small factor enables faster compression speed,
but produces a larger file. Maximum compression is achieved by using a value of 100.
TaskSaveAsWEBPMethodHelp=Specifies the compression method to use. This parameter controls the trade off between
encoding speed and the compressed file size and quality. When higher values are used,
the encoder will spend more time inspecting additional encoding possibilities and decide
on the quality gain. Lower value can result in faster processing time at the expense of
larger file size and lower compression quality.
TaskSaveAsWEBPTargetSizeHelp=Specifies a target size (in KBytes) to try and reach for the compressed output.
The encoder will make several passes of partial encoding in order to get as close
as possible to this target. This option is only effective when doing lossy encoding.
TaskSaveAsWEBPFilterStrengthHelp=Specifies the strength of the deblocking filter. 0 means no filtering and 100 - maximum
strength. Higher value will increase the strength of the filtering process applied after
decoding the picture. The higher the value the smoother the picture will appear. Typical
values are usually in the range of 20 to 50.
TaskSaveAsWEBPFilterSharpnessHelp=Specifies the sharpness of the filtering (if WEBP: Filter Strength is greater than 0).
Range is 0 (sharpest) to 7 (least sharp).
TaskShiftTimeHelp=Defines a time shift for the date/time-defining EXIF/IPTC tags.
TaskShiftTimeTagHelp=Defines the time-shift tag.
TaskShiftTimeSecHelp=Defines time-shift seconds.
TaskShiftTimeMinHelp=Defines time-shift minutes.
TaskShiftTimeHourHelp=Defines time-shift hours.
TaskShiftTimeDayHelp=Defines time-shift days.
TaskShiftTimeMonHelp=Defines time-shift months.
TaskShiftTimeYearHelp=Defines time-shift years.
TaskAddToPDFHelp=Saves images in a PDF document, with each image placed on a separate page.
TaskPDFNameHelp=Defines a file name for saving the PDF document.
TaskPDFPathHelp=Defines a file path for saving the PDF document.
TaskPDFCompressionHelp="Defines a filter for compressing the PDF document. No compression means
that no compression will be used; the G4FAX and G4FAX2D compression
methods are intended for monochrome images only (1 bit per pixel);
DCT-JPEG compression is intended for color images (more than 1 bit per pixel);
and LZW compression can be used for any images."
TaskPDFPaperFormatHelp=Defines the paper size. There are several presets to select from: A0, A1,
A2, A3, A4, A5, A6, B5, Letter (8.5"x11"), Legal (8.5"x14"), or Ledger (17"x11").
You can also set the paper size manually by selecting Custom.
TaskPDFPaperWidthHelp="Defines the page width. The sizes are measured in Adobe PDF points
(1 point = 1/72 of an inch). This option is visible only if the Paper Format
option is set to Custom."
TaskPDFPaperHeightHelp=Defines the page height. In other respects, this option is similar to Paper Width.
TaskPDFAuthorHelp=Defines the name of the person who created the document.
TaskPDFCreatorHelp=Defines the name of the application that created the document.
TaskPDFKeywordsHelp=Defines keywords associated with the document.
TaskPDFSubjectHelp=Defines the subject of the document.
TaskPDFTitleHelp=Defines the name of the PDF document.
TaskPDFProducerHelp=Defines the name of the application that converted the image to PDF.
TaskPDFOrderedPagesHelp=Places frames sequentially. Only relevant for multi-threaded processing. Requires more
memory and increases the processing time.
TaskAutoCropHelp=Automatically crops the image based on the given color or transparency.
TaskAutoCropTypeHelp=Defines the cropping mode. If this option is set to By Transparency,
the edges of the image will be cropped based on the transparency channel,
according to the value of Transparency. If this option is set to By Color,
cropping will be done according to the given color. If By contours is selected,
the cropping is done in such a way as to fit all the contours that could be determined.
TaskAutoCropAlphaHelp=Defines the transparency level for cropping, as a number from 0 (complete transparency)
to 255 (complete opacity).
TaskAutoCropColorHelp=Defines the color of the image frame to be cropped.
TaskAutoCropToleranceHelp=Defines tolerance for cropping the image based on the given color or transparency.
Possible values: 0 ... 255.
TaskAutoCropThreshold1Help=The first threshold is for double threshold filtering used for edge detection. Values below
this threshold are discarded.
TaskAutoCropThreshold2Help=The second threshold is for double threshold filtering used for edge detection. Values above
this threshold are discarded.
TaskAutoCropMinLimitHelp=Specifies the minimum contours size in pixels. All contours whose area is smaller for a given
pixel value will be discarded. This option is conveniently used to remove small debris at the
edges of images which prevents cropping.
TaskAutoCropDebugHelp=If this option is checked, then cropping is not performed. Instead, all the contours found
and the frame of the image that will be cropped are drawn on the image.
TaskBrightnessContrastHelp=Defines brightness and contrast.
TaskBCBrightnessHelp=Defines the brightness of the image. Possible values: -100 ... 512.
TaskBCContrastHelp=Defines the contrast of the image. Possible values: -100 ... 100.
TaskColorAdjustHelp=Defines the hue, saturation, and lightness of the image.
TaskCAHueHelp=Defines the hue of the image in the range from -180 to 180.
TaskCASatHelp=Defines the saturation of the image in the range from -100 to 100.
TaskCALightHelp=Defines the lightness of the image in the range from -100 to 100.
TaskColorBalanceHelp=Changes the red, green, and blue channels of the image.
TaskCBRedHelp=Defines the offset for the red channel. Possible values: -255 ... 255.
TaskCBGreenHelp=Defines the offset for the green channel. Possible values: -255 ... 255.
TaskCBBlueHelp=Defines the offset for the blue channel. Possible values: -255 ... 255.
TaskColorConvertHelp=Changes the number of channels and/or defines the number of colors.
When defining the number of colors, if necessary, also changes the number of channels.
TaskConvertModeHelp="Defines the number of bits per channel and the number of channels per pixel.
Possible values:
Monochrome - 1 bit per channel and 1 channel per pixel, that is, 1 bit per pixel
(monochrome image);
16 colors - 4 bits per channel and 1 channel per pixel, that is, 4 bits per pixel;
256 colors - 8 bits per channel and 1 channel per pixel, that is, 8 bits per pixel;
24 bits (16.7 million colors) - 8 bits per channel and 3 channels per pixel, that is,
24 bits per pixel;
32 bits (16.7 million colors with an alpha channel) - 8 bits per channel and
4 channels per pixel, that is, 32 bits per pixel;
Exact Colors Count - customize the number of colors."
TaskConvertColorCntHelp="Defines the number of colors. This option is visible only if the Mode option is set
to Exact Colors Count. Depending on the value, the number of bits per pixel
is also changed to contain the specified number of colors.
Possible values:
2 - monochrome image, 1 bit per pixel;
3 ... 16 - 4 bits per pixel;
17 ... 256 - 8 bits per pixel;
257 ... 16777216 - 24 bits per pixel;
16777217 - the number of bits per pixel is set to 24, but the number of colors
stays the same;
16777218 - the number of bits per pixel is set to 32 (an alpha channel is added),
but the number of colors stays the same."
TaskConvertColorAlphaColorHelp=Defines color to replace the alpha channel for images that has transparency.
TaskConvertToGrayHelp=Converts the image to gray by setting the same values for the red, green, and blue channels.
TaskCropHelp="Resizes the canvas. If the new size is less than the original one, the image
will be cropped. If the new size is larger than original, the image will be
enlarged without stretching to fit the new size; the extra space will be filled
with the color specified in the task, or the alpha channel (if the image supports
transparency) will be filled with the specified transparency."
TaskCropLeftHelp=Defines the position of the left edge of the image. A positive value will move
the image to the right, and a negative one, to the left. You can define the
position relative to Left,Center, or Right Edge. You can specify the position in
pixels, millimeters, centimeters, inches, or percent (relative to the width of the
image).
TaskCropRightHelp=Defines the position of the right edge of the image. In all respects, this
option is similar to Left Position.
TaskCropTopHelp=Defines the position of the top of the image. The position can be relative to
Top ,Center, or Bottom, and the percentage defines the position relative
to the height of the image. In all other respects, this option is similar to Left Position.
TaskCropBottomHelp=Defines the position of the image bottom. In all respects, this option is similar
to Top Position.
TaskCropColorHelp=Defines the color to fill the extra space created by resizing the image.
TaskCropAlphaHelp=Defines the value for filling the alpha channel of the extra space created by
resizing the image.
TaskCropBlurredImageHelp=Fills the extra space created by resizing the image with current image resized to a new
size and blurred.
TaskCropWidthHelp=Defines the new width of the image. You can also change the unit of measurement.
TaskCropHeightHelp=Defines the new height of the image. You can also change the unit of measurement.
TaskCropRelativeHelp=Defines that sizes are relative. If it turned on then Width and Height
parameters specifies an amount of space to add or remove around an image.
TaskCropJustificationHelp=Defines how the image sits inside the canvas.
TaskDelTagHelp=Deletes all EXIF and/or IPTC tags, or deletes specific tags only.
TaskDelTagTypeHelp=The type of tags to be deleted: all tags, EXIF only, IPTC only, or a specified tag.
TaskDelTagSpecHelp=Defines a specific tag to be deleted. This option is visible only if the Type
option is set to Specified Tag.
TaskFacebookHelp=Posts images on you Facebook page.
TaskFacebookAlbumHelp=Defines the album to upload images to. If there is no such album, it will be created.
If this option is empty, the images will be uploaded to the application's default album.
TaskFacebookAlbumMessageHelp=Defines the description of the album. This option is useful if the album specified by
the Album option does not exist and must be created.
TaskFacebookPageHelp=Defines the user's page to upload images to. If this option is empty, the images
will be uploaded to the user's personal album, not to the user's page. Instead of
the user's page, you can enter the user name (which is part of the page URL),
the name of the page, or the page ID (the internal page ID on Facebook, which
you can see sometimes as part of the page URL when the user name is not
specified). The search for the given page by the given value will be done in
the given order.
TaskFlipHelp=Flips the image horizontally or vertically.
TaskFlipHorizontalHelp=Flips the image horizontally.
TaskFlipVerticalHelp=Flips the image vertically.
TaskFrameHelp=Applies a customized frame to the image.
TaskFrameFileNameHelp=Defines the file name for the frame. Though you can use any image as a frame, it's
better to use a monochrome image (black means a completely transparent color,
and white means a completely opaque color), or a color image with an alpha
channel. The application comes with 30 ready-made frames.
TaskFrameInvertHelp=Defines inversion for the frame.
TaskFrameColorHelp=Defines the color of the frame. If the image supports transparency, you can also
use a Transparent color.
TaskGBlurHelp=Applies the Gaussian Blur filter with the specified radius.
TaskGBlurRadiusHelp=Defines a fractional value of the blur radius. The larger the radius, the fuzzier the image.
TaskInnerShadowHelp=Adds a shadow at the inner edge of the image.
TaskInnerShadowRadiusHelp=Defines the radius of the shadow. The larger the radius, the fuzzier the shadow.
TaskInnerShadowOffSetXHelp=Defines the horizontal offset of the shadow.
TaskInnerShadowOffSetYHelp=Defines the vertical offset of the shadow.
TaskInnerShadowColorHelp=Defines the color of the shadow.
TaskNegativeHelp=Inverts the colors in an image.
TaskNegativeChannelsHelp=Specifies the set of channels to be inverted.
TaskMotionBlurHelp=Applies the motion blur effect to the image.
TaskMotionBlurAngleHelp=Defines the offset angle for creating the motion blur effect.
TaskMotionBlurOffsetHelp=Defines the offset in pixels. A higher value will produce a stronger
motion blur effect.
TaskRenameHelp=Renames images.
TaskRenameFileNameHelp=Defines a new file name. In all respects, this option is similar to the File Name
option of the Save As task.
TaskRenameFolderHelp=Defines the folder for moving the image (if the value is different from the
original folder). In all respects, this option is similar to the Folder option of
the Save As task.
TaskRenameFileExistsHelp=Defines an action if a file with the specified path already exists. In all respects,
this option is similar to the If file exists option of the Save As task. The only
difference is that Overwrite is replaced by Remove the original.
TaskRenameCaseHelp=Defines the use of uppercase and lowercase letters.
TaskResetToOriginHelp=Cancels all changes done to the image by any tasks preceding the current task in the
queue. So the task following the current one will be processing the original image.
TaskResizeHelp=Resizes the image. You can specify either absolute or relative (percentage)
image sizes. You can also change only one size of the image, and the other
size will be changed automatically to preserve the proportions. Or you can
resize the image to fit the specified frame by checking the Constrain Proportions
option.
TaskResizeWidthHelp="Defines the width of the image. You can specify the width in pixels, percent,
centimeters, millimeters, or inches. The width can also be proportional (select
Proportional). In this case, you do not specify the width manually; it will be
calculated dynamically based on the Height parameter in such a way as to
preserve the original proportions."
TaskResizeHeightHelp=Defines the height of the image. In all respects, this option is similar to Width.
TaskResizeDPIHelp=Defines the DPI resolution of the image. You can also set it to Original. In
this case, DPI will be preserved.
TaskResizeFilterHelp=Defines the interpolation algorithm for resizing the image. For better quality, use
Hermite, Bell, BSpline, Lanczos3, Mitchell, Nearest, Bilinear, or Bicubic. For faster
processing, use Triangle, Linear, or FastLinear.
TaskResizeProportionsHelp=If this option is checked, the resized image will be fitted to the specified frame.
In this mode, the application will try to bring the respective sizes of the image to
those specified by Width and Height as close as possible while preserving the
original proportions. This option is enabled only if neither Width nor Height is set
to Proportional.
TaskResizeTypeHelp=Specifies how to process images. If Process All Images is set, then processing is
applied to all images. If Reduce Only is selected, only those images that are larger
than the specified sizes (they will decrease) will be processed, and those that are smaller
will remain unchanged. If Enlarge Only is selected, then all images that are smaller than
the specified sizes will be enlarged, and those that are larger than them will not change.
TaskResizeProportionsSizeHelp=Specifies the scaling method when constraining proportions. If the option
Not MORE than specified size is selected, then such maximum image sizes
will be selected with the original proportions preserved so that it fully fits
within the specified sizes. If the option Not LESS than specified size is selected,
then such minimum dimensions of the image will be selected with the proportions
preserved so that the rectangle with the given dimensions can fit inside the image.
This type of scaling is convenient to use with the Resize Canvas task
and the same dimensions to scale to the desired sizes with crop.
TaskResizePresetHelp=Use presets to save and quickly change resize settings. Use the button to save the preset
settings under a new name (specified in the Preset parameter) or overwrite an existing one.
TaskRotateHelp=Rotates the image by the specified angle. If the rotation angle is not divisible
by 90°, the resulting image may be distorted. To minimize distortion,
use antialiasing.
TaskRotateAutoHelp=If this option is turned on, the application will automatically rotate the image
using the Orientation tag in the EXIF data, provided that the image contains such
information. The application will also automatically update the Orientation tag.
TaskRotateAngleHelp=Defines the rotation angle (in degrees).
TaskRotateUseAntialiasHelp=Defines whether to use antialiasing when rotating the image.
TaskRotateAntialiasModeHelp=Defines the antialiasing algorithm. This option is visible if the Use Antialias
option is checked.
TaskRotateBackColorHelp=Defines the background color that will be visible if the image is rotated
by the angle not divisible by 90°.
TaskRoundImageHelp=Rounds the corners of the image.
TaskRoundWidthHelp=Defines the rounding width. You can specify either an absolute value (in pixels,
millimeters, centimeters, or inches) or a relative value (as a percentage of the
image width).
TaskRoundHeightHelp=Defines the rounding height.
TaskRoundBackgroundHelp=Defines the background color for rounding. If the image supports transparency,
you can use a Transparent color.
TaskSepiaHelp=Applies the sepia effect, that makes photos look older, in warmer colors.
TaskSetTagHelp=Defines the value of the EXIF or IPTC tag. You can also do that by combining other tags.
TaskSetTagNameHelp=Defines the tag to be changed.
TaskSetTagValueHelp=Lets you define the value of the tag specified by Tag Name. When specifying
the value of a text tag, you can copy the value of any other tag into the text
input field (similar to specifying the value of File Name for the Save As task).
As for the date/time tag, you can either enter its value or copy another tag's
value.
TaskSharpHelp=Sharpens photo by increasing edge contrast.
TaskSharpIntensityHelp=Defines the intensity of sharpening.
TaskSoftShadowHelp="Adds a soft shadow to the image by using its transparency channel. If the image
doesn't have a transparency channel, the soft shadow will be added only at the
fringes of the image; the shadow will be overlaid on the specified background
color."
TaskSoftShadowRadiusHelp=Defines the size of the shadow. The higher the value, the fuzzier the shadow.
TaskSoftShadowOffSetXHelp=Defines the shadow's horizontal offset relative to the image.
TaskSoftShadowOffSetYHelp=Defines the shadow's vertical offset relative to the image.
TaskSoftShadowAdaptSizeHelp=If this option is checked, the image will be resized in such a way as to
contain the whole shadow.
TaskSoftShadowColorHelp=Defines the color of the shadow.
TaskSoftShadowIntensityHelp=Defines the intensity of the shadow as an integer value from 0
to 100 (maximum intensity).
TaskSoftShadowBackgroundHelp=Defines the background color for the shadow. If the image supports transparency,
you can set the color to Transparent. In that case, the shadow will not have any
background but will be translucent.
TaskWatermarkHelp=Overlays a translucent image (watermark) on the main image.
TaskWMFileNameHelp=Defines a path and a file name for the image that will be used as a watermark.
TaskWMTransparencyHelp=Defines the watermark's transparency as a number from 0 (completely transparent)
to 100 (completely opaque).
TaskWMModeHelp=Defines the watermarking mode.
Custom - specify the watermark's width and height.
Stretch - the watermark will be stretched to fit the main image.
Tile - the main image will be covered with copies of the
watermark (whose size will be preserved).
TaskWMResampleFilterHelp=Defines the interpolation algorithm for resizing the watermark. For more
details, see the Filter option of the Resize task. This option is visible only
if the Mode option is set to Custom or Stretch.
TaskWMOperationHelp=Defines a bit operation for merging the watermark with the main image.
TaskWMOrientationHelp=Defines the watermark's orientation. If this option is set to Normal, the
orientation will be preserved. If you select Rotate 90°, Rotate 180°,
or Rotate 270°, the watermark will be rotated counterclockwise by 90,
180, or 270 degrees, respectively. If you select Flip Vertical or
Flip Horizontal, the watermark will be flipped vertically or horizontally,
respectively.
TaskWMWidthHelp=Defines the width of the watermark. You can specify a value higher or lower
than the width/height of the main image or the watermark by a given number
of pixels (millimeters, centimeters, inches, or percent). Or you can specify an
absolute or relative width (as a percentage). This option is visible only if the
Mode option is set to Custom.
TaskWMHeightHelp=Defines the height of the watermark. In other respects, this option is similar to Width.
TaskWMConstrainProportionsHelp=If this option is checked, the watermark's original proportions will be
preserved, and its sizes will not exceed the specified height and width.
This option is visible only if the Mode option is set to Custom.
TaskWMHorizJustificationHelp=Defines horizontal justification of the watermark. This option is visible only
if the Mode option is set to Custom.
TaskWMVertJustificationHelp=Defines vertical justification of the watermark. This option is visible only
if the Mode option is set to Custom.
TaskWMHorizOffsetHelp=Defines a horizontal offset relative to the current justification. A negative value
means “move to the left.” The values are measured as a percentage of the
watermark's width, which corresponds to 100%. This option is visible only if
the Mode option is set to Custom.
TaskWMVertOffsetHelp=Defines a vertical offset relative to the current justification. A negative value means
“move up.” This option is visible only if the Mode option is set to Custom.
TaskWatermarkTextHelp=Overlays a text message on the image. You can specify the contents of the message,
its format, position, rotation angle, opacity, and the merging operation.
TaskWTTextHelp=Defines the contents of the message overlaid on the image. You can use tags. In all
respects, this option is similar to the File Name option of the Save As task.
TaskWTFontHelp=Defines the font for the text. You can select a font face and specify font size,
style (bold, italics, or strikeout), and color.
TaskWTTransparencyHelp=Defines the text message's transparency as a number from 0 (completely transparent
text) to 100 (completely opaque text).
TaskWTOperationHelp=Defines a bit operation for merging the text message with the main image.
TaskWTRotateAngleHelp=Defines the angle to rotate the text message by.
TaskWTHorizJustificationHelp=Defines horizontal justification for the text message.
TaskWTVertJustificationHelp=Defines vertical justification for the text message.
TaskWTHorizOffsetHelp=Defines a horizontal offset relative to the current justification. A negative
value means “move to the left.” Values are measured as a percentage of
the text message's width, which corresponds to 100%.
TaskWTVertOffsetHelp=Defines a vertical offset relative to the current justification. A negative value
means “move up.”
TaskWhiteBalanceHelp=Automatically sets the white balance by using one of the three algorithms.
TaskWBAlgorithmHelp=Defines one of the three white-balance algorithms.
AutoWhite — adjusts colors by setting the white range.
Gray World — adjusts colors using the “Gray World” white-balance algorithm.
Gain Offset — adjusts the brightness by calculating the minimum and maximum
values for pixels, and then stretching colors to the maximum value.
Manual - allows you to manually set the white color.
TaskWBColorHelp=Sets the white color for which the white balance will be adjusted.
TaskReplaceColorsHelp=Replaces the specified color or range of colors or range of alpha values
to another color or a range of values of the alpha channel.
TaskReplaceColorsFromTypeHelp=Defines the type of values from which to replace:
Color - the color with a given tolerance.
Colors Range - the range, defined by two colors.
Transparency - the range of values in alpha channel.
TaskReplaceColorsFromColorHelp=Defines the color to be replaced.
TaskReplaceColorsFromToleranceHelp=Defines the tolerance of a color for replacement.
TaskReplaceColorsFromAlphaStartHelp=The start value of a range of alpha channel values.
TaskReplaceColorsFromAlphaEndHelp=The end value of a range of alpha channel values.
TaskReplaceColorsFromColorStartHelp=The start color of a range of colors to replace.
TaskReplaceColorsFromColorEndHelp=The end color for a range of colors to replace.
TaskReplaceColorsToTypeHelp=Defines the type of values to which to replace:
Color - the color to which to replace.
Transparency - the range of alpha values, that will be written to alpha channel.
TaskReplaceColorsToColorHelp=Defines a color, to which to replace.
TaskReplaceColorsToAlphaStartHelp=Defines the start value of the range of alpha values, to which to replace.
TaskReplaceColorsToAlphaEndHelp=Defines the end value of the range of alpha values, to which to replace.
TaskExtractChannelHelp=Allows you to specify the channel, that will be copied to the all other
color channels.
TaskExtractChannelChannelHelp=Choose a channel for a copying.
TaskPhotoCollageHelp=Creates a photo collage from your image.
TaskPhotoCollageCountHelp=Defines the number of squares in the row and in the column.
TaskPhotoCollageAngleHelp=Defines the maximum angle, at which all image pieces would be randomly rotated.
TaskPhotoCollageBorderSizeHelp=Defines the size of the border around the image pieces.
TaskPhotoCollageBorderColorHelp=Defines the color of a border.
TaskPhotoCollageBackColorHelp=Defines the background color.
TaskMosaicHelp=Creates the mosaic effect.
TaskMosaicSizeHelp=Defines the size of the mosaic square in pixels.
TaskCurvesHelp=Allows you to adjust image colors by curves. It works like a 'Curves' tool
in Adobe Photoshop.
TaskCurvesPresetsHelp=Previously saved presets, that you can use. You can create your own preset.
TaskCurvesCurvesHelp=Adjusting image colors by curves. For the more detailed info see help information
of Adobe Photoshop Curves tool.
TaskCurvesLoadPhotoshopCurvesHelp=Load curves from Photoshop curves file (*.acv)
TaskCurvesSavePhotoshopCurvesHelp=Save curves into Photoshop curves file (*.acv)
TaskFilterHelp=Lets you process only images that match the given condition(s).
TaskFilterExprHelp=The condition for further processing. If the result of the expression is 0,
ImBatch will skip the current image, otherwise the image will be processed
by the following tasks.
TaskUploadtoFTPHelp=Uploads current image to FTP server.
TaskUploadToFTPNameHelp=An image name (without an extension) of the file on server. You can use tags. For more
details see File Name parameter of Save As task.
TaskUploadToFTPTypeHelp=An image extension of the file on server. For more details see File Type parameter
of Save As task.
TaskUploadToFTPHostHelp=Represents the IP address or host name for the remote FTP server.
TaskUploadToFTPPortHelp=Indicates the port number to use when opening the control channel connection to the remote
FTP server.
TaskUploadToFTPFolderHelp=Used to specify the current directory on the FTP server file system for uploading.
TaskUploadtoFTPPresStructHelp=If this parameter is checked, then images will be uploaded to the folder on FTP-server,
relative to the folder specified in the Common Folder.
TaskUploadToFTPCommonFolderHelp=Common folder for images. All subfolders will be calculated relatively this folder and uploaded
on FTP-server. Automatically calculated, when Preserve structure parameter checked.
TaskUploadToFTPUsernameHelp=Specifies the name of the user used as the authentication identity when logging into the
FTP-server.
TaskUploadToFTPPasswordHelp=Specifies the authentication credentials used when logging in to the FTP server.
TaskUploadToFTPEncryptionHelp=Whether, and how, the FTP connection should be encrypted.
TaskUploadToFTPSSLVersionHelp=Specifies the SSL/TLS version for encryption. This parameter is active if parameter
Encryption is not set to No Encryption
TaskUploadToFTPWriteLogHelp=If the parameter is turned on, then all information when ImBatch communicates with the FTP
server during file upload is written to the specified log file.
TaskFileDeleteHelp=Moves image file to a Recycle Bin.
TaskFileCopyHelp=Copy the image file to a specified location.
TaskFileCopyFileNameHelp=A new image file name (WITHOUT AN EXTENSION!). You can use tags. For more information about tags see File Name parameter of Save As task.
TaskFileCopyFolderHelp=A new path for a file (where to copy). You can use tags. For more information see Folder parameter of Save As task.
TaskFileCopyFileExistsHelp=Defines an action if a file with the specified path already exists. For more information see If file exists parameter of Save As task.
TaskDeskewTextHelp=Deskew images with scanned text. This task works perfect with black-and-white scanned images.
TaskDeskewAngleRangeHelp=Angle range by which image may be rotated. If the Angle Range parameter is 30, then image may be rotated from -15 to +15 degrees.
TaskDeskewMaxQualityHelp=If this parameter checked, then task works on full-sized image. To speed-up processing, uncheck this parameter.
TaskDeskewUseAntialiasHelp=Defines whether to use antialiasing when rotating the image.
TaskDeskewAntialiasModeHelp=Defines the antialiasing algorithm. This option is active if the Use Antialias
option is checked.
TaskDeskewBackColorHelp=Defines the background color that will be visible if the image is rotated
by the angle not divisible by 90°.
TaskResizeCanvasByARHelp=Resizes the canvas, adjusting them to fit specified aspect ratio. It can expand and crop images
to fit proporions.
TaskResizeCanvasByARAspectRatioHelp=Specifies the required aspect ratio.
TaskResizeCanvasByARJustificationHelp=Alignment of the image regarding new dimensions.
TaskResizeCanvasByARMainSideHelp=Defines the side, that will be fit for the specified proporions. If the fit is on the lowest
side of the image, the image will be cropped, else if the fit is on the longest side, then
the image will be expanded. In the last case, the new space will be filled with the color
specified in the Background Color parameter.
TaskResizeCanvasByARBackColorHelp=Defines the color for the new space of expanded image (if selected Maximum (expand) in
Main Side parameter).
TaskOptimizeForWebHelp=Optimizes the image to reduce its size by removing redundant information and/or by compressin
graphical information. Images optimized in this way will be loaded faster on the site.
TaskOptimizeForWebFolderHelp=Defines the folder for saving the image. You can specify either an absolute path by
clicking the folder button, or a relative path by using the tags. For more detailed
information see Folder parameter in Save As task.
TaskOptimizeForWebFileExistsHelp=Defines an action if a file with the specified path already exists. For more detailed
information see If file exists parameter in Save As task.
TaskOptimizeForWebFileTypeHelp=Defines the image type. It is possible to set on of three types that are supported with all
browsers or you can set Same format value.
TaskOptimizeForWebProfileHelp=Specifies the optimization profile. Available values are:
High quality - image size is reduced slightly (in some cases may even increased), but
the processing is very fast and the quality remains very high.
Medium quality - is a compromise between the image quality and size.
Low quality - minimizes the size of the image while leaving the quality at an acceptable level.
Custom quality - gives the user opportunity to set the parameters of quality and
compression (For experienced users).
TaskOptimizeForWebJPEGColorSpaceHelp=Defines the color space for saving the JPEG image. For more detailed information see
JPEG: Color Space parameter in Save As task.
TaskOptimizeForWebJPEGDCTMethodHelp=Defines the discrete cosine transform (DCT) method. For more detailed information see
JPEG: DCT Method parameter in Save As task.
TaskOptimizeForWebJPEGCromaSubsamplingHelp=Defines chroma subsampling, which governs the quality of the resulting JPEG image. For more
detailed information see JPEG: Chroma subsampling parameter in Save As task.
TaskOptimizeForWebJPEGOptimalHuffmanHelp=If this option is turned on, the encoder will generate a Huffman Table optimized for the
actual frequency distribution in the image.
TaskOptimizeForWebJPEGQualityHelp=Defines the quality of the resulting image in the range from 1 to 100. For more detailed
information see JPEG: Quality parameter in Save As task.
TaskOptimizeForWebJPEGRemoveAllMarkersHelp=Removes all markers within a JPEG file (from APP0 to APP15 and COM). JPEG markers can
contain text, objects and images.
TaskOptimizeForWebJPEGProgressiveHelp=If checked, turns on a progressive scan of image.
TaskOptimizeForWebJPEGBlurHelp=Specifies the blur factor from 0 to 100. If this parameter is greater than 0, the compressor
smoothes the image before compressing it. This improves the level of compression.
TaskOptimizeForWebPNGCompressionHelp=Defines the lossless image compression rate from 0 (no compression) to 9 (the best compression),
with higher values resulting in longer operation of the encoder.
TaskOptimizeForWebPNGFilterHelp=Defines a filter to be applied before encoding the image. For more detailed information see
PNG: Filter parameter in Save As task.
TaskOptimizeForWebPNGTransparencyHelp=If this option is turned off, the alpha channel is not stored.
TaskOptimizeForWebPNGUsePaletteHelp=If checked, then the image color palette is used while encoding. The maximum number of
colors in the palette is 256.
TaskOptimizeForWebPNGColorCountHelp=Number of colors in the palette. Possible values are from 2 to 256.
TaskOptimizeForWebPNGInterlacedHelp=If this option is checked, the image will be decoded interlaced. For larger images, and slow
Internet connection it gives an opportunity to evaluate the image even before it was
fully downloaded.
TaskOptimizeForWebPNGRemoveTextFieldsHelp=Removes the text embedded in the PNG.
TaskOptimizeForWebPNGQualityHelp=Specifies the quality of the resulting image. If the value is less than 100, worsen an
image quality by reducing the number of colors.
TaskOptimizeForWebGIFColorCountHelp=The number of colors in the GIF-image. Possible values are from 2 to 256.
TaskOptimizeForWebGIFTransparencyHelp=If this option is turned on, then GIF-image is used transparency.
TaskOptimizeForWebGIFInterlacedHelp=If this option is checked, the image will be decoded interlaced.
TaskOptimizeForWebRemoveAllMetaHelp=Removes all meta information in the file (all text fields, EXIF, IPTC, XMP data etc).
TaskOptimizeForWebWEBPPresetHelp=Specify a set of pre-defined parameters to suit a particular type of source material.
You can choose one of these values: Default, Picture, Photo, Drawing, Icon and Text.
TaskOptimizeForWebWEBPLosslessHelp=Encode the image with preserving all graphic data information.
TaskOptimizeForWebWEBPQualityHelp=Specify the compression factor for RGB channels between 0 and 100. In case of lossy compression,
a small factor produces a smaller file with lower quality. Best quality is achieved by using
a value of 100. In case of lossless compression, a small factor enables faster compression speed,
but produces a larger file. Maximum compression is achieved by using a value of 100.
TaskOptimizeForWebWEBPMethodHelp=Specify the compression method to use. This parameter controls the trade off between encoding
speed and the compressed file size and quality. Possible values range from 0 to 6. When higher
values are used, the encoder will spend more time inspecting additional encoding possibilities
and decide on the quality gain. Lower value can result in faster processing time at the expense
of larger file size and lower compression quality.
TaskOptimizeForWebWEBPTargetSizeHelp=Specify a target size (in kilobytes) to try and reach for the compressed output. The compressor
will make several passes (specified in Passes parameter) of partial encoding in order to get as
close as possible to this target. If this parameter is 0, then other parameters will be taken
into account for compression.
TaskOptimizeForWebWEBPPassesHelp=Set a maximum number of passes to use to compress the image to needed size specified in the
Target Size parameter.
TaskOptimizeForWebWEBPRemoveAlphaHelp=Blends the source image with the color (specified in the Background Color parameter) using
the alpha channel (if present). The alpha channel is afterward removed.
TaskOptimizeForWebWEBPBackgroundColorHelp=Specifies the color to blend with the source image to remove the alpha channel afterward.
TaskOptimizeForWebWEBPAlphaQualityHelp=Specify the compression factor for alpha compression between 0 and 100. Lossless compression
of alpha is achieved using a value of 100, while the lower values result in a lossy compression.
TaskOptimizeForWebWEBPBestAlphaCompressionHelp=Gives the best mode for the alpha channel compression.
TaskAnaglyphHelp=Shifts red and blue-green colors relative to each other. You can set displacement's
power and angle.
TaskAnaglyphAngleHelp=Sets the angle of colors offset. Valid values: from 0 to 360°.
TaskAnaglyphOffsetHelp=Specifies the distance in pixels of colors offset. Valid values: 0..100.
TaskFishEyeHelp=Creates image distortion effect, like in the round lens.
TaskFishEyeSizeHelp=Specifies the size of distortion in percent relative to the image size.
TaskFishEyePowerHelp=Sets the power of distortion. The higher values zoom in image.
TaskSelAddHelp=Creates a new selection area by adding, subtracting, or replacing the selection area of the specified form.
TaskSelAddTypeHelp=Specifies the form of the new selection. Possible values:
Rectangle - a rectangular selection.
Ellipse - a selection of the elleptical form.
Rounded Rectangle - a rectangular selection with rounded corners.
TaskSelAddLeftHelp=Specifies the position of the left border of the selection.
TaskSelAddRightHelp=Specifies the position of the right border of the selection.
TaskSelAddTopHelp=Specifies the position of the top border of the selection.
TaskSelAddBottomHelp=Specifies the position of the bottom border of the selection.
TaskSelAddRoundWidthHelp=Specifies the width of a rounded rectangle. This parameter is visible only if the Selection Type is set to Rounded Rectangle.
TaskSelAddRoundHeightHelp=Specifies the height of a rounded rectangle. This parameter is visible only if the Selection Type is set to Rounded Rectangle.
TaskSelAddOperationHelp=Specifies the type of operation, that is performed when adding a new selection. It has the following values:
Replace - existing selection is replaced by the new one.
Add - adding the new selection to the existing one.
Subtract - subtracts the new selection from the existing one.
TaskSelAddIntensityHelp=Specifies the intensity of the new selection. The range is from 0 to 255, where 0 - no selection, 255 - the maximum intensity of the selection.
TaskSelGrHelp=Creates a gradient fill of the selection. You can set the coordinates of the start and end
point of the gradient as well as the value of the intensity of the selection at these points
and the type of gradient.
TaskSelGrTypeHelp=Specifies the type of gradient. Possible values: Linear, Reflected, Diamond, Radial, Conical.
TaskSelGrX1Help=Specifies the X coordinate of the starting point of the gradient.
TaskSelGrY1Help=Specifies the Y coordinate of the starting point of the gradient.
TaskSelGrX2Help=Specifies the X coordinate of the end point of the gradient.
TaskSelGrY2Help=Specifies the Y coordinate of the end point of the gradient.
TaskSelGrStartValHelp=Specifies the intensity of the gradient at the starting point.
TaskSelGrEndValHelp=Specifies the intensity of the gradient at the end point.
TaskSelGrJust1Help=Specifies the alignment for the starting point of the gradient.
TaskSelGrJust2Help=Specifies the alignment for the end point of the gradient.
TaskSelectionFeatherHelp=Blurs the current selection with the specified force.
TaskSelFeatherRadiusHelp=Specifies the force of the selection blurring.
TaskSelInvertHelp=Inverts the current selection.
TaskSelDeselectHelp=Cancels the selection.
TaskFillColorHelp=Fills the image with the specified color.
TaskFillColorColorHelp=Specifies the fill color.
TaskFillColorAlphaHelp=Specifies tha value for alpha channel to fill.
TaskContactSheetHelp=Places a specified number of thumbnails on a single image.
TaskContactSheetFileNameHelp="The output file name. It should contain the image extension. If no extension specified or
extension is not supported, then the file will be saved into JPEG format. If a file with
the same name at the specified path exists, it will create a new file name by adding numbers
in parentheses at the end of the file name. In the file name, you can use the <####> attribute
to place the index file where you want."
TaskContactSheetFilePathHelp=Specifies the path to the folder, where the files will be saved. If you select
Use the first file folder, then the path is taken from the first available image.
TaskContactSheetWidthHelp=Specifies the width of the resulting image.
TaskContactSheetHeightHelp=Specifies the height of the resulting image.
TaskContactSheetColsHelp=Specifies the number of thumbnails horizontally.
TaskContactSheetRowsHelp=Specifies the number of thumbnails vertically.
TaskContactSheetHSpacingHelp=Specifies the horizontal padding between thumbnails.
TaskContactSheetVSpacingHelp=Specifies the vertical padding between thumbnails.
TaskContactSheetFilterHelp=Specifies the filter that is used to resize thumbnails.
TaskContactSheetBackColorHelp=Specifies the background color.
TaskChangeChannelsHelp=Changes the order of channels in the image.
TaskExtractChannelRedChannelHelp=Sets the channel for the first (red) channel.
TaskExtractChannelGreenChannelHelp=Sets the channel for the second (green) channel.
TaskExtractChannelBlueChannelHelp=Sets the channel for the third (blue) channel.
TaskExtractChannelAlphaChannelHelp=Sets the channel for the fourth (alpha) channel.
TaskTemperatureHelp=Sets the color temperature of the image.
TaskTemperatureTemperatureHelp=Sets the temperature in Kelvin for light source.
TaskExposureHelp=It allows you to adjust exposure in the captured image.
TaskExposureExposureHelp=Sets the exposure compensation in exposure levels.
TaskAutoEqualizeHistogramHelp=Automatically equalize the image histogram. Usually it increases the global contrast
of the image. It is useful in images with backgrounds and foregrounds that are both
bright or both dark, for example in images that are over or under-exposed.
TaskConvertToGrayRedValueHelp=Sets the strength of influence of the red channel for the result black-and-white image.
TaskConvertToGrayGreenValueHelp=Sets the strength of influence of the green channel for the result black-and-white image.
TaskConvertToGrayBlueValueHelp=Sets the strength of influence of the blue channel for the result black-and-white image.
TaskConvertToGrayBrightnessValueHelp=Sets the brightness of the result black-and-white image.
TaskNormalMapHelp=Converts a height-map to a normal-map.
TaskNormalMapChannelHelp=Selects which channel to use as the height. Luminance is a monochrome value computed from Red, Green, and Blue channels.
TaskNormalMapMirrorUHelp=Mirroring across U coordinate.
TaskNormalMapMirrorVHelp=Mirroring across V coordinate.
TaskNormalMapInvertNormalHelp=Inverts the sign of the computed normal vector.
TaskNormalMapOcclusionHelp=Computes a crude occlusion term and stores in the resulting alpha channel.
TaskNormalMapScaleHelp=Scaling factor for normals.
TaskStrokeHelp=Is used to outline the image with transparency.
TaskStrokeWidthHelp=Simply sets the width of the stroke.
TaskStrokeMinAlphaHelp=Defines minimum value of transparency for which the stroke is applied.
TaskStrokeColorHelp=Defines the color of stroke.
TaskSaveAsCMYKHelp=Saves image into JPEG format and converts color space to CMYK.
TaskSaveAsCMYKFileNameHelp=Defines a new image name without an extension. In all respects, this option is similar
to the File Name option of the Save As task.
TaskSaveAsCMYKFolderHelp=Defines the folder for saving the image. In all respects, this option is similar to the
Folder option of the Save As task.
TaskSaveAsCMYKFileExistsHelp=Defines an action if a file with the specified path already exists. In all respects,
this option is similar to the If file exists option of the Save As task.
TaskSaveToGIFHelp=Saves images into an animated GIF file.
TaskSaveNameHelp=Defines a path and a file name for saving the GIF file.
TaskSaveDelayHelp=Defines the period for which the current image remains shown.
TaskSaveToGIFOptimizeHelp=Optimizes size of the resulted file by removing duplicated pixels in adjacent frames.
TaskGradientPaintHelp=Fills image with gradient, by replacing the color of each pixel on the color of gradient
at a point which corresponds to the selected channel value of the pixel.
TaskGradientPaintChannelHelp=Specifies the image channel, which will be matched with the gradient channel.
TaskGradientPaintGradientHelp=Specifies a gradient for the fill.
TaskGradientPaintInvertHelp=Inverts the gradient.
TaskReflectionHelp=Creates a reflection of the image and places it under the image, increasing it to the
required height.
TaskReflectionAlphaStartHelp=Sets the transparency of the beginning of the reflection.
TaskReflectionAlphaEndHelp=Sets the transparency of the end of the reflection.
TaskReflectionSizeHelp=Sets the size of the reflection as a percentage of the image height.
TaskReflectionNeedCropHelp=If checked, the reflection will be truncated to its size, specified in Size parameter.
TaskReduceNoiseHelp=Reduces noise on image.
TaskReduceNoiseRadiusHelp=Specifies the radius for smoothing noise.
TaskShiftChannelHelp=Moves the specified channel by an offset.
TaskShiftChannelOffsetXHelp=Horizontal offset in pixels.
TaskShiftChannelOffsetYHelp=Vertical offset in pixels.
TaskShiftChannelChannelHelp=Specifies the channel to shift.
TaskShiftChannelFillValueHelp=Specifies the channel value to fill the shifted space.
TaskSetDPIHelp=Allows you to set the number of pixels per inch (DPI) to display the photo correctly.
TaskSetDPIXHelp=Here you can set the number of pixels in an inch horizontally.
TaskSetDPIYHelp=Here you can set the number of pixels in an inch vertically.
TaskSetDPISetTypeHelp=Specifies the DPI setting mode. If you select Set Manually, the values are set directly.
If Calculate Automatically is selected, the DPI values are calculated based on the
document sizes specified.
TaskSetDPISyncHelp=Synchronizes the DPI values horizontally and vertically.
TaskSetDPIWidthHelp=Specifies the width of the document. If Proportional is specified, the width is calculated
based on the specified height and the aspect ratio of the image.
TaskSetDPIHeightHelp=Specifies the height of the document. If Proportional is specified, the height is calculated
based on the specified width and the aspect ratio of the image.
TaskSetDPISaveProportionsHelp=If checked, the proportions of the sides of the document will be adjusted to the aspect
ratio of the image so that they are not larger than the specified sizes.
TaskDeinterlaceHelp=Converts interlaced image or video frame into a non-interlaced form.
TaskDeinterlaceRemoveRowHelp=Defines which rows are empty (interlaced): odd or even.
TaskDeinterlaceNewRowTypeHelp=Defines how to replace interlaced rows. You can create row by making copy from neighbour
row or by interpolating between previous and next row.
TaskSetFileDateHelp=Specifies the date/time and some attributes for the file.
TaskSetFileDateCreatingDateHelp="Allows you to specify the date the file was created. The default value is Do Not Change.
You can set the exact date yourself by selecting <Set Date/Time Value> or set the current
date/time using the Now menu item or copy the value from other EXIF/IPTC/File fields.
Also, you can save the date/time value of the original image by selecting Keep Original."
TaskSetFileDateModifyingDateHelp="Allows you to specify the date of modification of the file. The default value is Do Not Change.
You can set the exact date yourself by selecting <Set Date/Time Value> or set the current
date/time using the Now menu item or copy the value from other EXIF/IPTC/File fields.
Also, you can save the date/time value of the original image by selecting Keep Original."
TaskSetFileDateLastAccessDateHelp="Allows you to set the date of the last access to the file. The default value is Do Not Change.
You can set the exact date yourself by selecting <Set Date/Time Value> or set the current
date/time using the Now menu item or copy the value from other EXIF/IPTC/File fields.
Also, you can save the date/time value of the original image by selecting Keep Original."
TaskSetFileDateReadOnlyHelp=It gives the ability to change the value of the "Read Only" attribute of the image file.
TaskSetFileDateIsHiddenHelp=It gives the ability to change the value of the "Hidden" attribute of the image file.
TaskSetBackgroundHelp=Inserts the specified image as the background for the current image being processed.
TaskSetBackgroundFileNameHelp=The path to the image to be used as the background.
TaskSetBackgroundWidthHelp=Settings for the width of the background. You can specify absolute (in pixels,
millimeters, centimeters or inches) or relative value (in percentage), depending
on the width or height of the background or current image.
TaskSetBackgroundHeightHelp=Settings for the height of the background. You can specify absolute (in pixels,
millimeters, centimeters or inches) or relative value (in percentage), depending
on the width or height of the background or current image.
TaskSetBackgroundConstrainProportionsHelp=If checked, the background size will preserve the original proportions of the background
image.
TaskSetBackgroundJustificationHelp=Sets the alignment for the current image.
TaskSetBackgroundHorizOffsetHelp=Sets the offset of the current image horizontally relative to its aligned position.
TaskSetBackgroundVertOffsetHelp=Sets the offset of the current image vertically relative to its aligned position.
TaskSetBackgroundCropHelp=Specifies whether the image must be cropped by the size of the background image.
TaskRemoveRedEyesHelp=Automatically removes red-eye from the image. Eye search is performed using the OpenCV
library algorithms.
TaskRemoveRedEyesCascadeFileNameHelp=Path to the file with the description of the cascade of classifiers in xml format.
TaskPanoramaHelp=Sticks together several photos taken from one point in different directions and saves to
one file.
TaskPanoramaNameHelp=The name of the file in which the panorama will be saved. You can use attributes for the name.
Attributes will be taken from the first file in the image list.
TaskPanoramaPathHelp=Path to the file in which the panorama will be saved. You can use attributes for the path.
Attributes will be taken from the first file in the image list.
TaskThresholdHelp=Cuts off the values in the corresponding channels according to the specified threshold type.
TaskThresholdTypeHelp=Specifies the type of threshold according to which the processing is performed:
Binary - all channel values that are greater than Value, are set to
Maximum, the rest are set to 0.
Binary (Inverted) - all channel values that are greater than Value,
are set to 0, the rest are set to Maximum.
Truncate - all channel values that are greater than Value, are set to
Value, the rest do not change.
To Zero - all channel values that are greater than Value do not change,
the rest are set to 0.
To Zero (Inverted) - all channel values that are greater than Value,
are set to 0, the rest do not change.
TaskThresholdValueHelp=Specifies the threshold value.
TaskThresholdMaxHelp=Sets the maximum channel value that is used when calculating some types of threshold.
TaskThresholdChannelsHelp=The channel to which the threshold is applied.
TaskAutoStitchHelp=Automatically sticks together several parts of a scanned document into one image
and saves to one file. Neighboring parts should have common pieces to determine their location
in the result image.
TaskAutoStitchNameHelp=The name of the file in which the stitched image will be saved. You can use file attributes
for the name. Attributes will be taken from the first file in the image list.
TaskAutoStitchPathHelp=Path to the file in which the stitched image will be saved. You can use file attributes
for the path. Attributes will be taken from the first file in the image list.
TaskGradientFillHelp=Fills the selected part of the image with the specified gradient or fills the entire image
if there is no selection.
TaskGradientFillTypeHelp=Specifies the type of gradient. Possible values: Linear, Reflected, Diamond, Radial, Conical.
TaskGradientFillGradientHelp=Sets the gradient to fill.
TaskGradientFillInvertHelp=Inverts the gradient.
TaskGradientFillX1Help=Sets the coordinate offset along the X for the beginning of the gradient.
TaskGradientFillY1Help=Sets the coordinate offset along the Y for the beginning of the gradient.
TaskGradientFillX2Help=Sets the coordinate offset along the X for the end of the gradient.
TaskGradientFillY2Help=Sets the coordinate offset along the Y for the end of the gradient.
TaskGradientFillJust1Help=Specifies the alignment for the start point of the gradient.
TaskGradientFillJust2Help=Specifies the alignment for the end point of the gradient.
TaskSelectionChannelHelp=Performs the selection by using the specified channel. For each pixel, the amount of selection
depends on the value in the choosed channel for a given pixel from 0 — the pixel is not selected
to 255 — the pixel is completely selected.
TaskSelectionChannelChannelHelp=Specifies which channel to use for selection.
TaskErosionHelp=An operation that process image based on shapes. It computes a local minimum over the area
of the specified kernel.
TaskErosionSizeHelp=The size of the kernel, that is scanned over the image. For every pixel it computes the minimum
pixel value overlapped by the kernel and replaces the image pixel under the anchor point.
TaskErosionTypeHelp=The type of the kernel. You can use different form of the kernel: Rectangle (default),
Cross or Ellipse.
TaskDilationHelp=An operation that process image based on shapes. It computes a local maximum over the area
of the specified kernel.
TaskDilationSizeHelp=The size of the kernel, that is scanned over the image. For every pixel it computes the maximum
pixel value overlapped by the kernel and replaces the image pixel under the anchor point.
TaskDilationTypeHelp=The type of the kernel. You can use different form of the kernel: Rectangle (default),
Cross or Ellipse.
TaskMedianHelp=Computes median of all pixel under kernel area and replaces the central element with this median
value. This is highly effective against salt-and-pepper noise in the images.
TaskMedianSizeHelp=The size of the kernel, that is scanned over the image.
TaskVectorizationHelp=Converts a raster black and white image to a vector representation.
TaskVectorizationFileNameHelp="A file name (WITHOUT AN EXTENSION! The extension defined via the File Type option)
to save converted vector image. You can use tags. Here’re more details about some tags.
In the File Attributes group: The <Current Index> tag, which has the format
<####>, will contain the current number of the image being processed. To change
the sequential number of an image, move it up or down. To define a specific number of digits
in the index, put the same number of the # characters in the tag; any empty places will be
filled with leading zeros. The <Original Name> tag defines the file name AND the extension."
TaskVectorizationFileTypeHelp=Defines the vector image type to save.
TaskVectorizationFolderHelp=Defines the folder for saving the vector image. You can specify either an absolute path
by clicking the folder button, or a relative path by using the tags.
TaskVectorizationFileExistsHelp="Defines an action if a file with the specified path already exists. If the
Auto Rename option is set, the application will automatically try to
modify the file name by affixing a number as follows: File_name(#).extension,
where # indicates the location of the number."
TaskVectorizationInvertHelp=Inverts monochrome black-and-white image.
TaskVectorizationThresholdHelp=Defines the threshold when converting a full color image to monochrome.
TaskVectorizationSpecklesHelp=Used to “despeckle” the bitmap to be traced, by removing all curves whose enclosed
area is below the given threshold.
TaskVectorizationTurnPolicyHelp=Determines how to resolve ambiguities during the decomposition of bitmaps into paths.
TaskVectorizationAlphaMaxHelp=Specifies a threshold for the detection of corners. It controls the smoothness of the traced
curves.
TaskVectorizationOptiCurvesHelp=Will attempt to “simplify” the final curve by reducing the number of Bezier curve segments.
TaskVectorizationOptiToleranceHelp=Defines the amount of error allowed in this simplification. Larger values tend to decrease
the number of segments, at the expense of less accuracy.
TaskVectorizationAutoColorHelp=If this option is checked, the program will try to find color automatically.
TaskVectorizationColorHelp=Specifies a color for enclosed paths.
TaskVectorizationScaleHelp=Specifies a scale of resulted vector image.
TaskVectorizationColorsNumHelp=The number of colors in the vector image.
TaskSwirlHelp=Created a swirl effect. The strength of the effect and direction depends on the
Angle parameter.
TaskSwirlAngleHelp=Specifies the twist angle. The larger the angle, the stronger the effect. If the angle
is negative, the twist will be performed in the opposite direction.
TaskOffsetHelp=Shifts the image horizontally and vertically by the specified value without changing the
size of the image. The empty space that appears is filled in the way with the specified
parameter Fill Empty Space With.
TaskOffsetXHelp=Sets the horizontal offset. You can specify the offset units in the Units field.
If you select %, then the offset will be relative (relative to the width of the image).
You can also enter various expressions in the field.
TaskOffsetYHelp=Sets the vertically offset. You can specify the offset units in the Units field.
If you select %, then the offset will be relative (relative to the height of the image).
You can also enter various expressions in the field.
TaskOffsetFillMethodHelp="Specifies the method for filling the empty space that was created due to the offset. Possible values:
Color - the empty space will be filled with the color specified in the Color field; if the image has
an alpha channel, it will be filled with the value specified in the Alpha field.
Wrap - the empty space will be filled with the repeated image.
Mirror - the empty space will be filled with the reflected image.
Repeat Edges - the empty space will be filled with the color taken from the borders of the image."
TaskSeparateHelp=Searches on an image with a given background for individual objects larger than the specified
limit, cuts them out with the addition of border of specified sizes on each side, and saves
each object in a separate file with the name specified according to the template.
TaskSeparateFileNameHelp="Specifies the name of the file to which the object will be saved. The tag <####> sets the
serial number of the found object to be saved. For more information, see the help for the
File Name parameter of the Save As task."
TaskSeparateFilePathHelp=Specifies the path to the file to which the object will be saved. For more information, see
the help for the Folder parameter of the Save As task.
TaskSeparateFileTypeHelp=Specifies the type of file in which the object will be saved. For more information, see
the help for the File Type parameter of the Save As task.
TaskSeparateFileExistsActionHelp=Specifies the action that will be performed if the file to which the found object will be
saved exists. For more information, see the help for the If File Exists parameter of the
Save As task.
TaskSeparateBackModeHelp=Sets the image background color setting mode. If the background is white or shades of gray,
it is better to use the value White. Otherwise, use the HSV.
TaskSeparateGreyScaleHelp=Sets the minimum and maximum threshold in shades of gray for the background.
TaskSeparateHSVHelp=Sets the minimum and maximum threshold for Hue, Saturation, and Brightness of background color.
TaskSeparateMinLimitHelp=Sets the minimum limit for finding objects. All objects that are smaller than the specified
threshold will be discarded.
TaskSeparateLeftHelp=Specifies the size of the left border of the bounding box. The left border of bounding box
of all found objects will be increased (or reduced in the case of a negative value) by a
specified number of pixels.
TaskSeparateRightHelp=Specifies the size of the right border of the bounding box. The right border of bounding box
of all found objects will be increased (or reduced in the case of a negative value) by a specified
number of pixels.
TaskSeparateTopHelp=Specifies the size of the top border of the bounding box. The top border of bounding box
of all found objects will be increased (or reduced in the case of a negative value) by a
specified number of pixels.
TaskSeparateBottomHelp=Specifies the size of the bottom border of the bounding box. The bottom border of bounding
box of all found objects will be increased (or reduced in the case of a negative value) by
a specified number of pixels.
TaskSeparateDrawDebugHelp=If this option is turned on, then the contours of all found objects and a bounding box
(taking into account the boundaries) around those objects that correspond to the specified
limits will be drawn in the preview window. During processing, neither contours nor bounding
boxes will be drawn. Please note that if the image is not displayed at the actual scale in the
preview window, the contours may not be displayed correctly.
TaskSplitHelp=Splits the image into the specified number of fragments horizontally and vertically.
TaskSplitFileNameHelp="Specifies the name of the file into which each fragment of image will be saved. The <####> tag
specifies the sequence number of the fragment to be saved. Tag <Column Index> specifies the
column number, and the <Row Index> - row number for the current slice of the image to be saved.
Sequential, column, and row numbering starts at 0. You can shift the sequence number tag
by a specified value using the following tag format: <#### number> (e.g. <#### 5>).
Note: a single space as a separator is required! Formatting for column numbering can be specified
using the following tag format: <Column Index[!TEMPLATE!: #### number]> (for example,
<Column Index[!TEMPLATE!: #### 1]>) where number is the offset for the index. The formatting
for row numbering is similar. For information on other tags, see the File Name
parameter for the Save As task."
TaskSplitFilePathHelp=Specifies the path to the file into which the fragment of the image will be saved.
For more information, see the Folder parameter of the Save As task.
TaskSplitFileTypeHelp=Specifies the type of file into which the fragment of the image will be saved.
For more information, see the File Type parameter of the Save As task.
TaskSplitFileExistsActionHelp=Specifies the action that will be performed if the file to which the fragment of the
image will be saved already exists. For more information, see the help for the
If File Exists parameter of the Save As task.
TaskSplitColsHelp=Specifies the number of columns by which the current image will be split.
TaskSplitRowsHelp=Specifies the number of rows by which the current image will be split.
TaskSplitDrawDebugHelp=If this parameter is turned on, a grid will be drawn in the preview window, along
which the image will be split.
TaskSaveToCSVHelp=Saves the desired meta information to a CSV-file.
TaskSaveToCSVFileNameHelp=The name of the CSV-file to write information to.
TaskSaveToCSVFilePathHelp=The path to the CSV-file to write.
TaskSaveToCSVExistsActionHelp="Defines an action if a file with the specified path already exists. If the Auto Rename
option is selected, the program will automatically try to modify the file name by affixing
a number as follows: File_name(#).csv, where # indicates the location of the number. If the
value Append is selected, the program will append the generated meta information to the end
of the file (IMPORTANT! Make sure that when appending to an existing file the number of columns matches!)"
TaskSaveToCSVDelimiterHelp=Specifies the delimiter for values in a row. According to RFC 4180, this separator must be
a comma. But it is allowed to use other characters as a separator if the comma is reserved for
the decimal separator for the current locale.
TaskSaveToCSVColumnsHelp=List of columns with customized tags for each column.
TaskSaveToCSVColumnsAddHelp=Add a new column to the end of the column list.
TaskSaveToCSVColumnsDelHelp=Delete Column.
TaskRasterizeVectorHelp=Specifies the dimensions for rasterizing a vector image.
TaskRasterizeVectorWidthHelp=Specifies the desired width of the raster image (while maintaining the aspect ratio of
the original vector image).
TaskRasterizeVectorHeightHelp=Specifies the desired height of the raster image (while maintaining the aspect ratio of
the original vector image).
TaskDescreenHelp=Used to remove scanning artifacts from a printed source (magazine, newspaper, or book) such as
halftone, periodic noise, moire.
TaskDescreenThresholdHelp=Sets the threshold for searching of image artifacts. They can be seen as light dots in the debug
image outside the center area. All parts of the debug image that will be removed are highlighted
in red.
TaskDescreenAmountHelp=Specifies the size of the additional artifact removal field.
TaskDescreenCenterSizeHelp=Specifies the inverted scale of the center portion of the debug image to be retained (highlighted in
green in the debug image if the Draw Mask option is turned on). The higher the value, the smaller
the center portion of the image.
TaskDescreenShowDebugHelp=If this parameter is turned on, a debug image is drawn in the preview. The debug image is not drawn
when processing starts, even if this option is checked.
TaskDescreenDebugChannelHelp=Specifies the channel for which you want to draw a debug image if the Show Debug option is turned on.
TaskDescreenDrawMaskHelp=If this parameter is turned on, then the debug image areas (selected according to the settings
of the task) are painted over with red color, which are image artifacts, and will be removed.
And the green color marks the central part of the debug image, which should be preserved.
TaskPaddingHelp=Adds padding to the edges and at the same time reduces the image so that the dimensions of the
image after processing remain the same as in the original image.
TaskPaddingHorizAbsolute=Specifies absolute values for horizontal padding.
TaskPaddingLeftHelp=Sets the size of the left padding.
TaskPaddingRightHelp=Sets the size of the right padding.
TaskPaddingHorizProportional=Specifies the relative values for horizontal padding. If the vertical padding has absolute values,
then the horizontal padding will be selected in such a way as to preserve the aspect ratio of the
original image.
TaskPaddingHorizJustHelp=Sets the horizontal alignment of the original image with automatic selection of the horizontal
padding values.
TaskPaddingHorizOffsetHelp=Specifies the horizontal offset of the original image when aligned accordingly.
TaskPaddingVertAbsolute=Specifies absolute values for vertical padding.
TaskPaddingTopHelp=Sets the size of the top padding.
TaskPaddingBottomHelp=Sets the size of the bottom padding.
TaskPaddingVertProportional=Specifies the relative values for vertical padding. If the horizontal padding has absolute values,
then the vertical padding will be selected in such a way as to preserve the aspect ratio of the
original image.
TaskPaddingVertJustHelp=Sets the vertical alignment of the original image with automatic selection of the vertical
padding values.
TaskPaddingVertOffsetHelp=Specifies the vertical offset of the original image when aligned accordingly.
TaskPaddingColorHelp=Sets the fill color for padding.
TaskPaddingAlphaHelp=Sets the level of transparency for padding.
TaskPhotoshopPluginHelp=Processes the image using the specified Photoshop plug-in. The task works only with filters
(plugins for Photoshop with extension 8bf). When processing the first image, a window with plugin
settings is displayed. All subsequent image processing is carried out with the same settings
without displaying the settings window.
TaskPhotoshopPluginFileNameHelp=Specifies the full path to the plugin.
TaskPhotoshopPluginOptionsHelp=Forces displays a window with plug-in settings, the path to which is specified in the
File Name parameter.